Nikon LS-1000 - Manual (Page 20)

- 20 -
• The power source must be grounded.
• If possible, try to use an independent electric outlet. If the unit is
connected to an outlet to which an electric household appliance,
such as a vacuum cleaner or air-conditioner, is connected, the
product may experience power source noise interference.
• Do not extend the power cord of the product, as this may cause
malfunction.
* The shape of the plug depends
on the country of use.
4.2 Connecting the Power Cord
Before connecting the power cord, confirm that the unit’s
power switch is in the off position.
Insert the female end of the supplied power cord into the AC
inlet located on the rear panel, then insert the plug into the AC
power outlet.
5
* The shape of the plug depends
on the country of use.