Nikon COOLPIX-S8100 - Manual (Page 180)

168
Setup Menu
Basi
c Came
ra Setup
Motion Detection
Enable motion detection to reduce the effects of subject movement and camera
shake when shooting still images.
The current motion detection setting can be confirmed in the camera monitor
with shooting (
A 6, 23). The motion detection icon turns green when the camera
detects camera shake and increases shutter speed. When
Off is selected, no icon is
displayed.
d button M z (Setup menu) (A 158) M Motion detection
U Auto
When the camera detects subject movement or camera shake, the ISO sensitivity
and shutter speed are automatically increased to reduce blurring.
However, motion detection does not function in the following situations.
• When the flash mode is set to fill-flash
• In A (auto) mode, when
ISO sensitivity (A 49) is set to any setting other than
Auto
• In the following scene modes:
- j (night landscape) ( A 58)
- e (night portrait) ( A 59)
- R (backlighting) (A 60)
-
Dusk/dawn (A 63), Museum (A 66), Fireworks show (A 66)
• In subject tracking mode ( A 70)
• In continuous shooting mode ( A 73)
k Off (default setting)
Motion detection is not enabled.
B
Notes on Motion Detection
• Motion detection may be unable to completely eliminate the effects of subject movement and
camera shake in some situations.
• Motion detection may not function if the subject exhibits significant movement or is too dark.
• The images captured using motion detection may be somewhat “grainy” in appearance.