Nikon COOLPIX-S8100 - Manual (Page 33)

21
Inserting Memory Cards
First Ste
p
s
B
Formatting Memory Cards
If the message on the right is displayed when the camera is turned
on, the memory card must be formatted before use (
A 172). Note
that formatting permanently deletes all images and other data
on the memory card. Be sure to make copies of any images you
wish to keep before formatting the memory card.
When formatting the memory card, use the rotary multi selector to
choose
Yes and press the k button. The confirmation dialog will
be displayed. To start formatting, choose
Format and press the k
button.
• Do not turn the camera off or open the battery-chamber/memory card slot cover until formatting
is complete.
• Be sure to use this camera to format memory cards previously used in other devices the first time
they are inserted into the COOLPIX S8100 ( A 172).
B
Note on the Write Protect Switch
When memory card switch is in the lock position, data cannot
be written to, or deleted from, the memory card. If the switch
is in the lock position, unlock it by sliding the switch to the
write position to save or delete images, or to format the
memory card.
B
Notes on Memory Cards
• Use only Secure Digital memory cards.
• Do not perform the following during formatting, while data is being written to or deleted from the
memory card, or during data transfer to a computer. Failure to observe this precaution could result
in the loss of data or in damage to the camera or memory card:
- Remove the battery or memory card
- Turn off the camera
- Disconnect the AC adapter
• Do not format the memory card using a computer.
• Do not disassemble or modify.
• Do not drop, bend, or expose to water or strong physical shock.
• Do not touch the metal terminals with your fingers or metal objects.
• Do not affix labels or stickers to the memory card.
• Do not leave in direct sunlight, closed vehicles, or areas exposed to high temperatures.
• Do not expose to humidity, dust, or corrosive gases.
Card is not formatted.
Format card?
Yes
No
Write protect switch