Nikon P530 - Manual (Page 58)

40
Sh
ooting Fea
tures
y M f Party/indoor
• To avoid the effects of camera shake, hold the camera steady. Set Vibration
reduction ( A91) to Off in the setup menu when using a tripod to stabilize the
camera during shooting.
y M k Close-up
From the screen displayed after k Close-up is selected, select Noise reduction
burst or Single shot.
• Noise reduction burst: This enables you to shoot a sharp image with a
minimum of noise.
- Press the shutter-release button all the way to capture a series of images
which are combined into a single image and saved.
- Once the shutter-release button is pressed all the way, hold the camera still
until a still image is displayed. After taking an image, do not turn the camera
off before the monitor switches to the shooting screen.
- If the subject moves or there is a significant camera shake during continuous
shooting, the image may be distorted, overlapped, or blurred.
- The angle of view (i.e., the area visible in the frame) seen in the saved image is
narrower than that seen in the monitor at the time of shooting.
• Single shot (default setting): Saves images with emphasized outlines and
contrast.
- One image is captured when the shutter-release button is pressed all the way.
• The focus mode ( A61) setting is changed to D (macro close-up) and the
camera automatically zooms to the closest position at which it can focus.
• You can move the focus area. Press the k button, use the multi selector
HIJK or rotate it to move the focus area, and press the k button to apply
the setting.