Nikon P7700 - Manual (Page 128)

110
G
e
neral C
a
me
ra
Setup
General Camera Setup
The Setup Menu
From the menu screen, select the z tab to display the
setup menu, and then you can change the following
settings.
Press the
d button M z (setup) tab (A11)
Option Description A
Welcome screen
Set whether or not the welcome screen is displayed
when power is turned on. The welcome screen image
can be selected.
E68
Time zone and date
Set settings related to the camera’s date and time. The
Time zone setting allows you to specify the time zone
where the camera is mainly used and whether or not
daylight saving time is in effect. When the x travel
destination is set, the camera automatically calculates
the time difference between the travel destination and
the w home time zone, and saves images using the
date and time of the travel destination.
E69
Monitor settings
Set the image display after shooting and the screen
brightness. When using Photo info, set whether or not
to display virtual horizon, histograms, and framing grid
on the monitor screen.
When using Virtual horizon display, set the virtual
horizon indicator to either Circle (default setting) or Bars.
E71
Print date
Imprint the shooting date and time on pictures at the
time of shooting. The default setting is Off.
Dates cannot be imprinted in the following situations.
- When the scene mode is set to Easy panorama,
Panorama assist, or 3D photography
- When Image quality ( A75) is set to NRW (RAW),
NRW (RAW) + Fine or NRW (RAW) + Normal
- When Continuous H: 120 fps or Continuous H: 60
fps is selected for Continuous ( A71)
- During movie recording
E72
Self-timer: after
release
Set whether or not to cancel the setting after shooting
pictures with the self-timer. The default setting is Exit
self-timer mode.
E73
AF assist
Vibration reduction
Self-timer: after release
Print date
Monitor settings
Time zone and date
Welcome screen
Set up