Nikon P7700 - Manual (Page 129)

111
The Setup Menu
G
e
neral C
a
me
ra
Setup
Vibration reduction
Reduce blurring caused by camera shake when
shooting. The default setting is On.
• When using a tripod to stabilize the camera, set this
feature to Off to prevent this feature from
malfunctioning.
E73
AF assist
When set to Auto (default setting), the AF-assist
illuminator (
A30) lights if shooting in dark
surroundings to help the camera focus.
• Even if Auto is selected, the AF-assist illuminator may
not light depending on the position of the focus area
or the scene mode that is selected.
E74
ISO sensitivity step
value
Change the step value of the sensitivity to be set for
ISO sensitivity of the quick menu. The default setting
is 1 step.
E74
Digital zoom
When set to On (default setting), rotating and holding
the zoom control toward
g (i) triggers the digital
zoom (
A29) if the optical zoom is at the maximum
telephoto zoom position.
When set to Crop, the digital zoom is limited to the
range (to the zoom position V) at which image quality
of the shot still picture does not deteriorate.
• The digital zoom cannot be used simultaneously in
certain settings such as the shooting mode.
E75
Zoom speed
Set the zoom operation speed.
When set to Auto (default setting), zoom operates at
Normal speed during still picture shooting. Zoom
operates at Quiet speed (slower than normal speed)
during movie recording.
E76
Fixed aperture
When set to On in C or D shooting mode, zoom
operates while keeping changes in the aperture value
to a minimum. The default setting is Off.
E76
Sound settings
Turn various camera sounds on and off. In the default
setting, beep sounds are on.
• The operation sound is disabled in certain settings
such as shooting mode.
E77
Record orientation
When set to Auto (default setting), the orientation data
is recorded with the picture taken.
E77
Rotate tall
When set to On (default setting), the images are
rotated automatically in accordance with the camera's
vertical orientation when they are played back.
E78
Auto off
Set the amount of time that passes before the monitor
is turned off to save power. The default setting is 1 min.
E78
Option Description A