Nikon L320 - Manual (Page 159)

E 53
Re
fere
nce
S
ecti
on
Vibration Reduction
You can select the vibration reduction setting used when shooting. Vibration reduction
allows you to reduce the effects of camera shake, which commonly occurs when shooting
with zoom applied or when shooting at slow shutter speeds. The effects of camera shake are
reduced when recording movies, in addition to when shooting still images.
Set Vibration reduction to Off when shooting using a tripod to stabilize the camera.
The icon for the current setting is displayed in the monitor when the camera is in shooting
mode (
A 8). No icon is displayed when Off is selected.
d button M z tab M Vibration reduction M k button
Option Description
g On (default setting) Vibration reduction is enabled.
k Off
Vibration reduction is disabled.
B
Notes About Vibration Reduction
• After turning on the camera or after switching from playback mode to shooting mode, wait for the
shooting mode screen to be displayed completely before taking pictures.
• Due to characteristics of the vibration reduction function, images displayed in the camera’s
monitor immediately after shooting may be displayed blurry.
• Vibration reduction may be unable to completely eliminate the effects of camera shake in some
situations.