Shooting issues – Nikon L320 User Manual
Page 188
F
10
Te
chni
cal
Note
s and
In
dex
Shooting Issues
Problem
Cause/Solution
A
Cannot switch to shooting
mode.
Disconnect USB cable.
No image captured when
the shutter-release button is
pressed.
• When camera is in playback mode, press the
A button, the shutter-release button, or the
b (e movie-record) button.
• When menus are displayed, press the d button.
• Batteries are exhausted.
• When flash lamp flashes, flash is charging.
Camera cannot focus.
• Subject is too close. Try shooting using easy auto
mode, Close-up scene mode, or macro mode.
• The intended subject is one with which autofocus
does not perform well.
• Set AF assist in the setup menu to Auto.
• Turn camera off and then on again.
Images are blurred.
• Use flash.
• Increase the ISO sensitivity value.
• Enable vibration reduction or motion detection.
• Use D (best shot selector).
• Use tripod and self-timer.
Streaks of light or partial
discoloration are visible in
the monitor.
Smear occurs when extremely bright light strikes the
image sensor. When shooting with Continuous set
to Multi-shot 16 and when recording movies,
avoiding bright objects, such as the sun, reflections of
the sun, and electric lights is recommended.
Bright specks appear in
images captured with flash.
Flash is reflecting off particles in air. Lower the flash or
set the flash mode setting to W (off).