Nikon S6 - Manual (Page 109)

99
Te
chnical Not
es
Problem Solution
Transfer marking does
not appear
Pictures were marked for transfer using another model of
camera. Mark pictures for transfer using S6.
81
PictureProject does
not start when cam-
era is connected
• Camera is off .
• Battery is exhausted.
• USB cable is not correctly connected.
• Appropriate USB option is not selected.
• Computer can not detect camera.
See the PictureProject reference manual (on CD) for further
information. 14
14
55
56
—
Cannot transfer
pictures
button can not be used to transfer pictures from inter-
nal memory when Mass Storage is selected for USB or if
memory card is locked. Transfer pictures using PictureProject
transfer button.
55, 56
Cannot transfer
Pictmotion movies
• Macintosh version of PictureProject does not support
Pictmotion transfer.
• button can not be used to transfer Pictmotion movies.
Use PictureProject transfer button.
• Easy Trans. (no PM) is selected in wireless transfer menu
(Windows only).
—
—
71
Profi le list is not dis-
played in wireless
mode
Set Interface > USB option in camera setup menu to PTP. 64–70
Wireless signal is poor
• Check that correct profi le is selected.
• Move camera closer to receiver.
• Remove any obstacles between camera and wireless LAN
adapter or access point.
70
—
—
Wireless transfer
interrupted
If battery is exhausted, recharge battery or use AC adapter.
Restart transfer after turning camera off and then on again. 9, 11,
14
Pictures not displayed
on television
• Choose correct video mode.
• USB cable is connected: disconnect USB cable 54
8
Format card >
Format option not
available
Batteries are low. 14