Nikon S6 - Manual (Page 80)

70
Wi
reless
Tr
ansf
er and P
rinting
Connecting to the Network
After creating a network profi le, you can connect to the network by selecting the
profi le from a list. Turn the camera on, select shooting mode, and follow the steps
below:
* To view settings for the selected profi le, press the zoom control to T ( ). If you are unable
to connect, check these settings to make sure they match those used on the network. If
the last session with the selected device did not terminate normally, the camera will briefl y
display a message stating that the session is now complete.
Auto Power Off
While the camera is in (wireless) mode, data transmission will continue after the camera
monitor turns off to save power (auto power off ;
88).
1
Display shooting mode menu.
2
Highlight .
3
CHOOSE PROFILE
Confirm Info
Profile-B
Profile-C
Profile-A
1/2
Display profi le list.
4
CHOOSE PROFILE
Confirm Info
Profile-B
Profile-C
Profile-A
1/2
Highlight profi le. *
5
WIRELESS MENU
Shooting Date
Shoot & Transfer
Selected Images
Easy Transfer (PM)
Easy Trans. (no PM)
Confirm Help
1/2
Select profi le. † If network profi le is selected,
wireless transfer menu shown at left will be
displayed when connection is established.
If printer profi le is selected, wireless printer
menu will be displayed (
73).
† To select another profi le, repeat Steps 1–5.