Nikon S3300 - Manual (Page 103)

87
The Setup Menu
G
e
neral C
a
me
ra S
e
tup
Vibration
reduction
Allows you to reduce blurring caused by camera shake
when shooting. The default setting is On.
• When using a tripod to stabilize the camera during
shooting, set this feature to Off to prevent this feature
from malfunctioning.
E56
Motion detection
When the camera detects camera shake or subject
movement at the time of shooting, it automatically
increases ISO sensitivity and shutter speed to reduce
blurring. The r indicator glows green when the camera
detects camera shake and increases shutter speed.
The default setting is Auto.
• When using certain shooting modes or settings, motion
is not detected. In this case the r indicator is not
displayed.
E57
AF assist
When set to Auto, the AF-assist illuminator (
A2) lights up
when shooting in dark surroundings to help the camera
focus. The default setting is Auto.
• The illuminator has a range of about 1.9 m (6 ft 2 in.) at
the maximum wide-angle position and about 1.1 m (3 ft
7 in.) at the maximum telephoto position.
• Even if Auto is selected, the AF-assist illuminator may
not light depending on the position of the focus area or
the scene mode that is selected.
E58
Digital zoom
When set to On, rotating the zoom control to g (i) at the
maximum optical zoom position triggers digital zoom
feature (
A27).
The default setting is On.
E58
Sound settings
Allows you to turn various camera sounds on and off.
The Button sound and Shutter sound settings are On
by default.
• When using certain shooting modes or settings, the
operation sound is disabled.
E59
Auto off
Allows you to set the amount of time that passes before
the monitor turns off to save power.
The default setting is 1 min.
E59
Option Description A