Nikon PC-E Micro NIKKOR 85mm f-2.8D - Manual (Page 22)

En
22
*1 Exposure will be incorrect when the lens is shifted and/or tilted.
*2 P includes AUTO (General-Purpose Program) and Vari-Program System.
*3 When the lens power or the camera is turned off (including
using the auto meter off function) while stopping down the
lens aperture, the diaphragm blades fully open to the maximum
aperture. This is not a malfunction.
*4 Stopping down the lens aperture activates AE-L (AE lock).
*5 Diaphragm blades open and close after each press of the shutter
button, and exposure will be incorrect for continuous shooting.
*6 When the lens power or the camera is turned off (including
using the auto meter off function) while stopping down the
lens aperture, the lens aperture remains at the stopped down
setting. When the camera is turned on again or the camera
shutter release button is lightly pressed, the diaphragm blades
open once and then close. This is not a malfunction.
*7 When the camera is turned off using the auto meter off
function while stopping down the lens aperture, lightly press
the shutter release button to display the selected aperture value
in the camera’s LCD or view finder before shooting. Failure to
do this may lead to incorrect exposure when the shutter release
button is fully depressed.
Aperture stop-down button (one-touch preset
aperture operation)
• The lens aperture can be stopped down from maximum aperture
to a selected aperture by pressing the aperture stop-down
button. Pressing the button again fully opens the aperture.
Whether the aperture is stopped down or not, check the camera
viewfinder, or check the diaphragm from the front of the lens.
• Even at maximum aperture after canceling the aperture stop-
down, the preset aperture value is displayed on the camera body.
• When using the D3, D700, D300 or D90 camera, the aperture is
stopped down to a selected aperture automatically by pressing
the shutter release button, even when the aperture is fully open
(maximum aperture) before shooting. When the lens power or
the camera is turned off (including using auto meter off
function) after stopping down the lens aperture by pressing the
aperture stopdown button, the aperture stop-down is cancelled
and the diaphragm blades fully open to the maximum aperture.