Depth of field, Focusing at a predetermined reproduction ratio – Nikon PC-E Micro NIKKOR 85mm f-2.8D User Manual

Page 29

Advertising
background image

En

29

9. Depth of field

• Approximate depth of field can be

determined by checking the depth of
field scale.

• Using the aperture stop-down button of

the lens or the camera’s depth-of-field
preview (stop-down) button (with the
D3, D700, D300 or D90 camera), the
depth of field can be observed while
looking through the camera viewfinder.

• For more information, see p. 248.
Note: When the lens is tilted, neither

the depth of field scale nor the distance scale can be used.
(Both scales can be used when the lens is shifted only.)

10. Focusing at a predetermined reproduction

ratio

The reproduction ratio is the relation between the size of the
image recorded on film and the actual subject size. If, for example,
the image on the focusing screen is one-fifth the actual subject
size, the reproduction ratio is 1:5.
To obtain the appropriate reproduction ratio for each focused
distance, see the table on page 248.

11. Notes on close-up photography and

duplication work

Camera shake
The PC-E Micro NIKKOR 85mm f/2.8D provides such exceptionally
high image magnification that even the slightest movement during
shooting can cause the image to blur. Be sure to mount the camera
on a tripod and use a cable release or remote cord to release the
shutter.
Close working distance
At the high reproduction ratios used in close-up shooting, the depth
of field is very shallow. To ensure greater depth of field, stop down
the lens, then carefully position the camera to ensure the most
important surface of the subject is in the same zone of sharp focus.

Fig. 11

Depth of field scale

Distance index

Advertising