Nikon S8200 - Manual (Page 179)

E 67
The Setup Menu
Re
fere
nce
S
ect
io
n
Vibration Reduction
Reduce the effects of camera shake while shooting. Vibration reduction reduces
blur, caused by slight hand movement known as camera shake, which commonly
occurs when shooting with zoom applied or at slow shutter speeds. The effects of
camera shake are reduced when recording movies, in addition to when taking still
pictures.
Set Vibration reduction to Off when shooting still images while using a tripod
to stabilize the camera.
The current vibration reduction setting is indicated by an icon when shooting
(
A 6). No icon is displayed when Off is selected.
d button M z tab M Vibration reduction
Option Description
g On (default setting)
Vibration reduction is enabled.
Camera automatically detects the panning direction and only
corrects for vibration due to camera shake. When the camera is
panned, for example, vibration reduction reduces only vertical
shake. If the camera is tilted, vibration reduction affects only
horizontal shake.
k Off Vibration reduction is not enabled.
B
Notes About Vibration Reduction
• After turning on the camera or after switching from playback mode to shooting mode, wait for the
shooting mode screen to be displayed completely before taking pictures.
• Due to characteristics of the vibration reduction function, images displayed in the camera’s
monitor immediately after shooting may be displayed blurry.
• Vibration reduction may be unable to completely eliminate the effects of camera shake in some
situations.
• When the Night landscape or Night portrait scene modes are set to Tripod, vibration
reduction is turned Off.