Error messages – Nikon P80 User Manual
Page 150
136
Te
chni
cal
N
o
tes
Error Messages
The following table lists the error messages and other warnings displayed in the
monitor, as well as the solutions for dealing with them.
Display
Problem
Solution
A
O (blinks)
Clock not set.
Set clock.
B
Battery running low.
Prepare to charge or
change battery.
N
Battery exhausted.
Battery exhausted.
Charge or change battery.
P
Battery temperature
high
Battery temperature is
high.
Turn off camera, and allow
battery to cool down
before resuming use. After
five seconds, this message
will disappear, the monitor
will turn off, and the
power-on lamp will blink
rapidly. After the lamp
blinks for three minutes,
the camera will turn off
automatically, but you can
also press the power
switch to turn it off
manually.
P
Please wait for the
camera to finish
recording.
O
Camera cannot perform
other operations until
recording is complete.
Wait until message clears
from display automatically
when recording is
complete.
N
Memory card is write
protected.
Write-protect switch is in
“lock” position.
Slide write-protect switch
to “write” position.
P
This card cannot be used.
Error accessing memory
card.
• Use approved card.
• Check that connectors
are clean.
• Confirm that memory
card is correctly inserted.
P
This card cannot be
read.
P
Card is not formatted.
Format card?
No
Yes
Memory card has not been
formatted for use in
camera.
Choose
Yes and press k
to format card, or turn
camera off and replace
card.