Nikon P80 - Manual (Page 32)

18
Fi
rst S
te
p
s
Setting Display Language, Date and Time
A language-selection dialog is displayed the first time the camera is turned on.
1
Press the power switch to turn on the camera.
The power-on lamp (green) will light and the LCD
monitor (or electronic viewfinder) will turn on. The
power-on lamp will turn off when the LCD monitor turns
on. Remove the lens cap.
2
Use the multi selector to choose the desired
language and press k.
For information on using the multi selector, see “The Multi
Selector” (
A 10).
3
Choose Yes and press k.
If
No is selected, the date and time will not be set.
4
Press k.
D
Daylight Saving Time
If daylight saving time is in effect, turn on
Daylight saving in the time zone menu and set the date.
1 Before pressing k in step 4, press the multi selector I to choose Daylight saving.
2 Press k to enable daylight saving time (w). Pressing k toggles the daylight saving time option
on and off.
3 Press the multi selector H, and then press k to proceed to step 5.
Set time and date?
No
Yes
Date
Time zone
London, Casablanca
Daylight saving