Nikon D5200 - Manual (Page 121)

104
• Manual movie settings: Choose On to allow manual
adjustments to shutter speed and ISO sensitivity when the
camera is in mode M. Shutter speed can be set to values as
fast as
1 /
4000
s; the slowest speed available varies with the
frame rate: 1 /
30
s for frame rates of 24p, 25p, and 30p, 1 /
50
s for
50i or 50p, and 1 /
60
s for 60i or 60p. ISO sensitivity can be set
to values between ISO 200 and Hi 2 ( 0 49). If shutter speed and ISO sensitivity are
not in these ranges when live view starts, they will automatically be set to
supported values, and remain at these values when live view ends. Note that ISO
sensitivity is fixed at the value selected; the camera does not adjust ISO sensitivity
automatically when On is selected for ISO sensitivity settings > Auto ISO
sensitivity control in the shooting menu (
0 154).
1
Select Movie settings.
Press the G button to display the menus.
Highlight Movie settings in the shooting
menu and press
2.
2
Choose movie options.
Highlight the desired item and press 2, then
highlight an option and press J.
A
Using an External Microphone
The optional ME-1 stereo microphone can be used to reduce noise caused by lens vibration
being recorded during autofocus.
D
The Count-Down Display
A count down will be displayed 30 s before live view ends automatically ( 0 97). Depending
on shooting conditions, the timer may appear immediately when movie recording begins.
Note that regardless of the amount of recording time available, live view will still end
automatically when the timer expires. Wait for the internal circuits to cool before resuming
movie recording.
G button