Nikon Df - Manual (Page 156)

136
t
Bracketing
Bracketing automatically varies exposure, flash level, Active
D-Lighting (ADL), or white balance slightly with each shot,
“bracketing” the current value. Choose in situations in which it is
difficult to set exposure, flash level (i-TTL and, where supported,
auto aperture flash control modes only; see pages 119 and 124),
Active D-Lighting, or white balance and there is not time to check
results and adjust settings with each shot, or to experiment with
different settings for the same subject.
❚❚Exposure and Flash Bracketing
To vary exposure and/or flash level over a series of photographs:
1
Select flash or exposure
bracketing for Custom
Setting e6 (Auto
bracketing set) in the
Custom Settings menu.
To display the menus, press
the G button. Select
Custom Setting e6 (Auto
bracketing set) in the
Custom Settings menu,
highlight an option, and
press J. Choose AE &
flash to vary both exposure and flash level, AE only to vary
only exposure, or Flash only to vary only flash level.
Exposure modified by:
0 EV
Exposure modified by:
–1 EV
Exposure modified by:
+1 EV
G button