Nikon Df - Manual (Page 284)

264
U
t
Bracketing
burst
If the Fn button is pressed while exposure, flash, or
ADL bracketing is active in single frame or quiet
shutter-release mode, all shots in the current
bracketing program will be taken each time the
shutter-release button is pressed. If white balance
bracketing is active or continuous release mode
(mode C
H
or C
L
) is selected, the camera will repeat the
bracketing burst while the shutter-release button is
held down.
e +NEF (RAW)
If image quality is set to JPEG fine, JPEG normal, or
JPEG basic, “RAW” will be displayed in the control
panel and an NEF (RAW) copy will be recorded with
the next picture taken after the Fn button is pressed
(to record NEF/RAW copies with a series of
photographs, keep the shutter-release button
pressed halfway between shots). To exit without
recording an NEF (RAW) copy, press the Fn button
again.
L
Matrix
metering Matrix metering is activated while the Fn button is
pressed.
M
Center-
weighted
metering
Center-weighted metering is activated while the Fn
button is pressed.
N Spot metering
Spot metering is activated while the Fn button is
pressed.
9
Viewfinder
grid display Press the Fn button to turn the framing grid display in
the viewfinder on or off (0 9).
m
Viewfinder
virtual horizon Press the Fn button to view a virtual horizon display in
the viewfinder (0 265).
n MY MENU Pressing the Fn button displays “MY MENU” (0 313).
6
Access top
item in MY
MENU Press the Fn button to jump to the top item in “MY
MENU.” Select this option for quick access to a
frequently-used menu item.
Option Description