Inserting memory cards, Removing memory cards – Nikon S9100 User Manual
Page 34
22
First Ste
p
s
Inserting Memory Cards
Data is saved in the camera’s internal memory (approximately 74 MB) or on
removable Secure Digital (SD) memory cards (commercially available;
If a memory card is inserted in the camera, data are automatically saved on
the memory card and data saved to the memory card can be played back,
deleted, or transferred. Remove the memory card to save data in the internal
memory, or play back, delete, or transfer data from the internal memory.
1
Be sure that the power-on lamp and the
monitor are off and open the battery-
chamber/memory card slot cover.
Be sure to turn off the camera before opening the cover.
2
Insert the memory card.
Slide the memory card in until it clicks into
place.
B
Inserting Memory Cards
Inserting the memory card upside down or
backwards could damage the camera or
the memory card. Be sure to check that the
memory card is in the correct orientation.
3
Close the battery-chamber/memory card slot cover.
Removing Memory Cards
Turn the camera off and be sure that the power-on
lamp and the monitor have turned off before opening
the battery-chamber/memory card slot cover.
Press the card in (1) to partially eject the card, then
remove the card by hand while being careful not to
remove the card at an angle (2).
• The camera, battery, or memory card may be hot
immediately after using the camera. Observe caution when removing the
battery or memory card.
Memory card slot