Nikon S9100 - Manual (Page 93)

81
Burst Shooting (Continuous Shooting Mode)
More on
Sh
ooting
B
Notes on Continuous Shooting Mode
• It may take some time to save the images after shooting. The amount of time it takes to finish
saving the captured images depends on the number of images, image mode, the write speed of
the memory card, etc.
• When ISO sensitivity increases, noise may appear in captured images.
• The speed of continuous shooting may decrease depending on the image mode, type of memory
card used, and shooting conditions.
• When Continuous is set to Pre-shooting cache, Continuous H: 120 fps, Continuous H: 60
fps, or Multi-shot 16, banding or variance in brightness or hue may occur in images that were
captured under lighting that flickers at high speeds, such as fluorescent, mercury-vapor, or
sodium-vapor lighting.
C
Functions Available in Continuous Shooting Mode
• Brightness (exposure compensation), vividness, and hue can be adjusted with the creative slider
( A 40).
• Press the d button to display the C (continuous) menu and change continuous shooting
mode settings ( A 82).
• Flash and self-timer cannot be used.
C
Images Captured in Continuous Shooting Mode
Each time images are captured using Continuous H, Continuous L, Pre-shooting cache,
Continuous H: 120 fps, or Continuous H: 60 fps, the captured images are saved as a “sequence”
(
A 92).
D
More Information
• See “Autofocus” ( A 29) for more information.
• See “Playing Images Captured Using Continuous Shooting Mode (Sequence)” ( A 92) for more
information.