Auto off – Nikon S5200 User Manual
Page 227
E
95
Referen
Auto Off
If no operations are performed for a specified amount of time, the monitor turns off and the
camera enters standby mode (
This setting determines the amount of time that passes before the camera enters standby
mode. You can select 30 s, 1 min (default setting), 5 min, or 30 min.
C
When the Monitor Has Turned Off to Save Power
• When the camera is in standby mode, the power-on lamp flashes.
• If no operations are performed for approximately another three minutes, the camera will turn off
automatically.
• When the power-on lamp is flashing, pressing any of the following buttons will turn the monitor
back on:
Power switch, shutter-release button, A button,
c button, or b (e movie-record) button
C
Notes About Auto Off
• The time that passes before the camera enters standby mode is fixed in the following situations:
- When a menu is displayed: Three minutes minimum (or 5 min or 30 min, if these settings are
selected)
- During slide show playback: Up to 30 minutes
- When the AC adapter EH-62G is connected: 30 minutes
- When an audio video cable or HDMI cable is connected: 30 minutes
• The camera does not enter standby mode when transferring images using an Eye-Fi card.
Press the
d button M z menu icon M Auto off M k button