Nikon P7100 - Manual (Page 130)

E4
Using Panorama Assist
Re
fere
nce
S
ect
io
n
5
Shoot the next picture.
• Match the outline of the next picture so that
1/3 of the frame overlaps the previous
picture, and press the shutter-release button.
• Repeat until you have taken the necessary
number of pictures to complete the image.
6
Press the
k button when shooting is completed.
• The camera returns to step 3.
B
Notes on Panorama Assist
• Set the flash mode, self-timer/remote control, focus mode and exposure compensation before
releasing the shutter for the first picture. The settings cannot be changed after shooting the first
picture. Pictures cannot be deleted, nor can zoom, Image quality (
A75), or Image size (A77)
be adjusted after shooting the first picture.
• The panorama series is terminated if the auto off function ( E82) triggers the standby mode
during shooting. To prevent this, setting a longer time for the auto off function is recommended.
C
R (exposure lock) Indicator
When using panorama assist mode, all pictures in the panorama
have the same exposure, white balance, and focus as the first
picture of the panorama.
When the first picture is shot, R is displayed on the monitor
to indicate that exposure, white balance, and focus are locked.
C
Panorama Creation
Transfer pictures taken to a computer ( A94) and use Panorama Maker 5 to join them in a single
panorama.
Install Panorama Maker 5 on a computer using the included ViewNX 2 CD.
C
More Information
See “File and Folder Names” ( E99) for more information.
1341 1341 1341 End End End
1341 1341 1341 End End End