Nikon P7100 - Manual (Page 98)

80
Sh
ooting Feat
ures
Features That Cannot Be Used Simultaneously
Some shooting settings cannot be used in combination with other functions.
Restricted function Setting Description
Flash mode
Focus mode
(
A67)
When B (infinity) is selected for shooting, the flash is
not available.
Continuous
(
A54)
• When BSS or Multi-shot 16 is selected for
shooting, the flash is not available.
• When continuous is selected for shooting, the built-
in flash is not available ( A84).
• The built-in flash is fixed at X (fill flash) when
Continuous flash is selected for shooting. The
Speedlight (external flash unit) cannot be used
(
A84).
Auto bracketing
(
A73)
The built-in flash is not available.
Wide-angle
converter (
A55)
The flash is not available when On is set for shooting.
Flash control
(
A55)
When Flash control is set to Built-in off, V (auto with
red-eye reduction), S (manual), Y (slow sync) and Z
(rear-curtain sync) flash modes cannot be selected.
Self-timer/Smile
timer/Remote
control
AF area mode
(
A55)
When Subject tracking is selected for shooting, the
self-timer/smile timer/remote control are not available.
Focus mode
Smile timer
(
A65)
When shooting with the smile timer, the mode is
changed to A (autofocus).
Continuous
(
A54)
B (infinity) cannot be used when Continuous flash is
set for shooting.
AF area mode
(
A55)
When Subject tracking is selected for shooting,
E (manual focus) is not available.
Image quality
Continuous
(
A54)
When Multi-shot 16 is selected for shooting, Image
quality is fixed at Normal.
Image size
Image quality
(
A75)
• Image size is fixed at M
3648×2736 when NRW
(RAW) is selected for Image quality.
• Image size for a JPEG image can be set when NRW
(RAW) + Fine, NRW (RAW) + Normal or NRW
(RAW) + Basic is selected. However, I
3648×2432, z 3584×2016 and H 2736×2736
cannot be selected.
Continuous
(
A54)
Image size is fixed at D (2560×1920 pixels) when
Multi-shot 16 is selected for shooting.
ISO sensitivity
Continuous
(
A54)
When shooting in Multi-shot 16, ISO sensitivity is
set automatically according to the brightness when
shooting mode
A, B or C is used. The setting for ISO
sensitivity is fixed at 400 for shooting mode D.