American Dryer Corp. Gas/Steam Models ML-82 - Manual (Page 13)

11
Telephone: (508) 678-9000 Fax: (508) 678-9447
Tumbler Bearing Assembly
Illus. No. Part No. Qty. Description
1 880220 1 1-3/4” Flange Bearing
2 153025 4 9/16” Lock Washer
3 152050 4 9/16-12 Hex Nut
4 150508 2 3/8-16 x 3/4” Hex Head Machine Bolt
5 153005 4 3/8” Lock Washer
6 152005 2 3/8-16 Hex Nut
7 150600 2 3/8-16 x 1-1/2” Hex Head Machine Bolt
8* 153004 6 3/8” Flat Washer
9 153005 2 3/8” Lock Washer
10 152005 4 3/8-16 Hex Nut
11 150501 4 5/16-18 x 3/4” Hex Head Machine Bolt
12 153002 4 5/16” Lock Washer
13 153001 4 5/16” Flat Washer
14 150621 2 5/16-18 x 1-1/2” Hex Head Machine Bolt
15 152004 2 5/16-18 Hex Nut
16 801107 1 1-3/8” Bearing Box Assembly Complete with Rotational Sensor Assembly
(includes illus. nos. 4 through 20 and 25)
801103 1 1-3/8” Bearing Box and Support ONLY
(includes illus. nos. 4 through 6, 16, and 17)
801105 1 1-3/8” Bearing Box ONLY
17 801104 1 Pillow Block Bearing Support ONLY
18 880779 1 1-3/8” Pillow Block Bearing Assembly with Magnet
19 152004 4 5/16-18 Hex Nut
20 150610 2 5/16-18 x 1-1/2” Allen Set Screw
21 101118 1 18-3/4” Pulley
22 101119 1 1-3/8” Taper Lock Hub (key is not included)
23 100735 1 Shaft Key
(for taper lock hub)
24 100106 1 5L-690 V-Belt (to idler assembly)
25 824807 1 Rotational Sensor Assembly
* Some models require a quantity of 4.