American Dryer Corp. Gas/Steam Models ML-82 - Manual (Page 21)

19
Telephone: (508) 678-9000 Fax: (508) 678-9447
Hot Surface Ignition (HSI) Burner Assembly (continued)
Illus. No. Part No. Qty. Description
4 881597 1 Hot Surface Ignitor - 24 VAC
5 128921 1 Hot Surface Ignition (HSI) Flame-Probe
6 141105 4 Large Burner Tube
7 150103 4 #8-32 x 1/2” Phillips Pan Head Machine Screw
8 153000 4 #8 Steel Bar
9 151001 6 #8-32 Pal Nut
10** 140856 4 #23 Burner Orifice (natural gas) ONLY
140811 4 #41 Burner Orifice (liquid propane [L.P.]) ONLY
11 141210 1 3/4” Manifold (4-port)
12 323769 2 Pipe Bracket (bent)
13 128928 1 1/2” 24 VAC Redundant (natural gas) Gas Valve
881052 1 1/2” 24 VAC Redundant (liquid propane [L.P.]) Gas Valve
882119** 1 Hot Surface Ignition (HSI) liquid propane (L.P. ) Conversion Kit
14 142715 2 1/2” x 1/2” Nipple
15 142511 1 3/4” x 1/2” Reducing Elbow
16 142829 1 3/4” x 20” Pipe
17 323763 1 Gas Valve Bracket
18 842891 1 Sail Switch to Hi-Limit Harness
19 319704 1 Hi-Limit Mounting Bracket
20 151000 2 #6-32 Pal Nut
21 151001 2 #6-32 x 1/2” Round Head Machine Screw
22 130201 1 330º Manual Reset Hi-Limit Thermostat ONLY
23 -------- 1 Sail Switch
(refer to Sail Switch Assembly on page 20)
24 141300 1 3/4” Union Shutoff
25 142709 2 3/4” x 2” Nipple
26 142601 1 3/4” Union
27 142924 1 1” to 3/4” Reducing Coupling
28 810029 1 Hot Surface Ignition (HSI) Mounting Bracket Assembly
29 881797 1 Hot Surface Ignition (HSI) Module II
30 150301 1 #8-18 x 7/16” Phillips Pan Head TEK Screw
* Burner orifices are not included and must be ordered separately.
** Consult factory for elevations over 2,000 feet.