Airlink UG-ASW224-1103 - Manual (Page 12)

24-Port 10/100Mbps Ethernet Switch User Guide
12 AirLink+
Figure 1. Attach Brackets to Switch
When installing the Switch on a level surface, attach the
rubber feet to the bottom of each device. The rubber feet
cushion the hub and protect the hub case from scratching.
Rack Mounting
The switch can be mounted in an EIA standard-size, 19-inch
rack, which can be placed in a wiring closet with other
equipment. Attach the mounting brackets at the switch's
front panel (one on each side), and secure them with the
provided screws (see Figure 1).