Airlink UG-ASW224-1103 - Manual (Page 9)

AirLink+ 9
24-Port 10/100Mbps Ethernet Switch User Guide
characterized by higher latencies. Routers are also used to
segment LANs. However, since routers are expensive,
difficult to setup, and require intensive maintenance, they
are relatively impractical for the network. Switches, on the
other hand, are less expensive, easier to set up, and
practically maintenance free, which make them an ideal
solution to today's LAN congestion problems.
Features
The Switch is designed for easy installation and high
performance in an environment where traffic on the
network and the number of user increase continuously.
The Switch, with its rack size, is designed for middle- to
large -sized workgroups. The Switch provides immediate
access to a rapidly growing network through a wide range
of user-reliable functions.
The Switch is ideal for deployment with multiple high-speed
servers for shared bandwidth 10Mbps or 100Mbps
workgroups. With the highest bandwidth 200 Mbps
(100Mbps full-duplex mode), any port can provide
workstations with a congestion-free data pipe for
simultaneous access to the server.
The Switch is expandable by cascading two or more
switches together. Since all ports support 200Mbps, the
Switch can be cascaded from any port and to any number of
switches.
The Switch is a perfect choice for site planning to upgrade to
Fast Ethernet in the future. Ethernet workgroups can
connect to the Switch now, and change adapters and hubs