3 printhead cleaning, 4 cleaning the platen and the card feed rollers, Printhead cleaning – HID DTC1250e/DTC1000Me/DTC4250e User Guide User Manual
Page 36: Cleaning the platen and the card feed rollers
DTC1000Me/DTC1250e/DTC4250e Card Printer User Guide, PLT-01668, Rev 1.1
Page
36
April 2014
4.4.3
Printhead Cleaning
Caution: Turn OFF the printer and unplug the power cord from the printer.
Attention: Éteignez l'imprimante et débranchez le cordon d'alimentation de l'imprimante.
Step Procedure
1
Remove the ribbon cartridge.
2
Open the printhead cleaning swabs. Break it to moisten the tip.
3
Swab the tip back and forth across the top of the printhead. Allow to dry thoroughly before
sending a print job.
4.4.4
Cleaning the Platen and the Card Feed Rollers
Perform this procedure approximately every
1000 prints to maintain a consistent print quality.
Note: The card feed rollers move the card throughout the print process. Rollers should be kept
clean to prevent card jams and card contamination. This cleaning process will ultimately lead to
better print quality and extended printhead life.
Step Procedure
1
Open the printer’s front cover, remove the print ribbon and close the front cover.
Remove all the cards from the printer’s input card hopper.