HID DTC1250e/DTC1000Me/DTC4250e User Guide - Manual (Page 59)

DTC1000Me/DTC1250e/DTC4250e Card Printer User Guide, PLT-01668, Rev 1.1
April 2014 Page 59
4.10 Overlay / Print Area
Use the Overlay / Print Area tab to control and customize where the Overlay (O) panel and/or the
print area appear on the card. By default, this option is set to print and overlay the entire card.
The orientation of the card display area is determined by the orientation specified in your template.
4.10.1 Defining an Overlay or Print Area
To define an overlay or print area:
Click the
Front or Back radio button to specify the side of the card to apply the area definition.
Click the drop down button in the Overlay / Print Area field and select the option that serves your
purpose:
Full Card – Select this option to overlay and/or print the entire card.
Defined Area(s) – Select this option to overlay and/or print only in the selected and definea area(s).
Undefined Area(s) – Select this option to overlay and/or print in the space outside the selected and
defined area.
Omit Smart Chip Area – Select this option to overlay and/or print only in the space outside the
standard location of a smart chip.
Omit Mag Strip Area – Select this option to overlay and/or print only in the space outside the
standard location of an ISO-standard magnetic stripe.