HID DTC400E/C30E/M30E User Guide - Manual (Page 100)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.1) 4-53
3 Verify if the Horizontal Image Position Setting is set correctly or incorrectly.
See the graphic below.
• If the white border is on the leading edge of the card, adjust the
Horizontal value by +2.
• If the white border is on the trailing edge of the card, adjust the
Horizontal value by -2.
a. Click on OK.
b. Run a self-test.
c. If the white border is diminished, continue the adjustment until it is gone.