HID FARGO HDPii User Guide - Manual (Page 292)

HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
292
Step Procedure
1 Run the Fargo Workbench Printer Utility by selecting from the start menu the
following:
Start -> Programs -> Fargo -> Fargo Workbench Printer Utility -> Fargo
Workbench
2 Click on Actions > Select Printer in the Menu Bar to bring up the Printer
Select dialog, as shown below.
Step Procedure
3 Access the Upgrade Firmware window from the Actions Menu, as shown
below.
4 Select the New Firmware File by clicking Browse and selecting the Firmware
file from the appropriate folder.
5 Begin the upgrade by clicking Upgrade, as shown below.
6 Reboot the printer