Troubleshooting – Karcher KMR 1250 D KAT User Manual

Page 26

Advertising
background image

-

11

Troubleshooting

Fault

Remedy

Appliance cannot be started

Sit on the driver seat, the seat contact switch gets activated
Charging or replacing battery
Refuel
Open fuel cock
Fill in motor oil
Inform Kärcher Customer Service.

Engine is running erratically

Clean or replace air filter
Inform Kärcher Customer Service.

Engine is running but machine is
only moving slowly or is not moving
at all

Release parking brake
Check setting of freewheel lever
Inform Kärcher Customer Service.

Machine is not sweeping properly Check roller brush and side brushes for wear, replace if necessary.

Check function of bulk waste flap
Empty waste container
Check sealing strips for wear, adjust or replace as required
Adjust roller mirror
Check drive belts of the roller brush and side-brushes
Inform Kärcher Customer Service.

Dust gathers in the machine

Switch off dust suction; set the lever to "dry" sweeping operations
Check suction fan drive belt
Check dust filter, clean or replace
Check sealing strips for wear, adjust or replace as required

High emptying does not function

Replace fuse
Switch is defective; inform Kärcher Customer Service
Hydraulic unit is defective; inform Kärcher Customer Service
Inform Kärcher Customer Service.

Roller brush does not turn.

Remove belts or cords from roller brush

Operation problems with hydraulic
movement parts

Inform Kärcher Customer Service.

Device moves forward or back-
wards when the accelerator is re-
leased

Zero position is defective; inform Kärcher Customer Service

26

EN

Advertising
This manual is related to the following products: