Operation – Karcher NT 14-1 Ap Te Adv User Manual

Page 14

Advertising
background image

– 3

After the wet vacuuming: Clean the flat
folded filter with the filter cleaning.
Clean the electrodes with a brush.
Clean the container with a damp rag
and dry it.

Illustration
The suction hose is equipped with a clip
system. All C-35/C-DN-35 accessories can
be connected.

Illustration

Fold the push handle upward. The push
handle will lock into place.

Press the latches on the side of the
push handle. Fold the push handle
down.

Plug in the main plug.

Switch on the appliance at the main
switch.

Only for appliances with built-in socket:

ƽ

Danger

Risk of injury and damage! The socket out-
let is only for the connection of power tools
to the vacuum cleaner. Any other use of the
socket outlet is not permitted.

Connect the mains plug of the electric
power tool to the vacuum cleaner.

Switch on the appliance at the main
switch.

Indicator lamp is on; vacuum cleaner is in
the standby mode.
Note: The vacuum cleaner is turned on and
off automatically with the electric power
tool.
Note: The vacuum cleaner starts automat-
ically within 0.5 seconds and continues to
run for 15 seconds after the power tool has
being switched off.

Note: Please refer to "Technical specifica-
tions" for the power connection specifica-
tions of the power tools.
Illustration

Adjust the stepped power tool adaptor
to fit the connection of the electric pow-
er tool.

Illustration

Remove the elbow from the handle.

Insert the connection socket on the
handle.

Illustration

Connect the adaptor to the electric pow-
er tool.

Note: A filter dedusting every 5 to 10 min-
utes will increase the life of the flat folded
filter.
Illustration

Press and hold the button on the handle
and press the button for the semi-auto-
matic filter cleaning 5 times. The flat
folded filter is automatically cleaned
through an air jet (pulsating sound).

Illustration

Press the chassis latches and remove
the vacuum unit.

Illustration

Clean areas that are difficult to access
or steps.

Press and hold the button on the handle
and press the button for the semi-auto-
matic filter cleaning 5 times.

Switch off the appliance at the main
switch.

Pull out the mains plug.

Empty the container.

Vacuum and wipe the appliance inside
and outside with a damp cloth.

Clip connection

Operation

Fold the push handle in/out

Turning on the Appliance

Working with electrical power tools

Semi-automatic filter dedusting

Cleaning areas that are difficult to

access

Turn off the appliance

After each operation

14

EN

Advertising
This manual is related to the following products: