Karcher BP 3 Home & Garden - Manual (Page 26)

– 7
Special accessories
The figures of the following special accessories can be found on page 4 of these instruc-
tions.
6.997-344.0 Pump pre-filter,
large (flow rate up to
6,000 l/h)
Pump pre-filter for all common pumps without inte-
grated filters. To protect the pump against coarse
dirt particles or sand. The fine filter can be washed.
For pumps with G1 (33.3 mm) connection thread.
6.997-350.0 Suction assembly
3.5 m, 3/4"
Completely ready for connection, vacuum-proof spi-
ral hose with suction filter and backflow stop. Can
also be used as an extension for the suction hose.
For pumps with G1 (33.3 mm) connection thread.
6.997-349.0 Suction assembly
7.0 m, 3/4"
6.997-348.0 Suction hose 3.5 m,
3/4"
Completely ready for connection, vacuum-proof spi-
ral hose for direct connection to the pump. To ex-
tend the suction assembly or for use with suction fil-
ters. For pumps with G1 (33.3 mm) connection
thread.
6.997-359.0 Pump connection
G1 (33.3 mm) incl.
Check valve
Vacuum-resistant connection of the hoses to the
pump.
For pumps with G1 (33.3 mm) connection thread
and 3/4" as well as 1" hoses, including union nut,
hose clamp, flat packing and check valve.
Do not install the check valve included in the set!
6.997-347.0 Vacuum-proof spi-
ral hose, yard
goods, 25 m, 3/4"
Vacuum-proof spiral hose. Yard goods for cutting
hoses to individual lengths. When combined with
the Kärcher connection pieces and the Kärcher suc-
tion filters, it can be used as an individual suction
assembly.
6.997-346.0 Vacuum-proof spi-
ral hose, yard
goods, 25 m, 1"
6.997-345.0 Suction filter Basic
3/4“(19 mm)
To be connected to the suction hose yard goods.
The backflow stop prevents the return flow of the
delivered water and thus reduces the time required
for suction to start again. Including hose clamp.
6.997-342.0 Suction filter with
backflow stop, ba-
sic, 1"
6.997-341.0 Suction filter with
backflow stop, pre-
mium
To be connected to the suction hose meter length.
The backflow stop prevents the return flow of the
transported water and thus shortens the re-suction
time.
Durable metal/plastic construction. Suitable for 3/4“
(19 mm) and 1“ (25.4 mm) hoses.
Including hose clamp.
26 EN