Karcher FP 303 - Manual (Page 12)

– 6
It is recommended to perform the complete
care 2 to 3 times per year.
 Sweep, vacuum or wipe the floor or
floor covering with a moist rag if neces-
sary.
 Use a mop to distribute the care product
evenly on the floor. Let dry completely
Notes: Please observe the instructions
for use of the flooring and care product
manufacturers!
Do not use care products containing
solvents.
Illustration

Drive across the surface multiple times
as shown in the illustration until the de-
sired shine is achieved.
Always move the appliance while it is
running. Do not stay in one place for ex-
tended periods, because this could
cause damages to the flooring.
Note: Observe the manufacturer's in-
structions regarding when to walk on
the floor or move furniture, etc. We rec-
ommend waiting at least 12 hours. Dur-
ing this period, only walk on the surface
carefully and not in street shoes. Do not
move any furniture and do not apply
water to the floor.
We recommend performing the mainte-
nance care procedures once per month to
achieve an evenly distributed shine.

Depending on the manufacturer, the
care product can be poured directly into
the cleaning water. Please observe the
instructions for use of the flooring and
care product manufacturers!
 Then polish the surface.
 Depending on the requirements and the
use of the floor (foot marks, streaks...),
the care coat can be polished multiple
times without the need of applying new
care products to the floor.
 Bring the strut back to a vertical posi-
tion. Appliance switches off.
Illustration

Remove the mains plug and wrap it
around the hook provided at the strut.
First turn the upper cable hook up-
wards.
Ensure that the appliance moves on the
transport wheels while transporting it from
one room to another or moving it to its stor-
age location.
Illustration

For this, press handle backwards and
pull the appliance.
We recommend activating the transport
lock if the appliance will not be used for ex-
tended period of time.
Illustration

Place the appliance on the floor so that
the polishing head is positioned perpen-
dicular to the surface.
 Remove the pad holder from the appli-
ance and place it into the storage com-
partment.
 Press the transport lock into the intake
of the pad holder on one side and hold
it there. Firmly press the other side of
the transport lock into the intake of the
second pad holder and lock into place.
 Store the appliance upright in a dry
room.
Complete care
Remove the dirt from the floor
Applying care products
Polishing
Maintenance care
Intermediate care
Finish operation
Transporting the appliance
Storing the Appliance
12 EN