A&D Waterproof Digital Platform Scale HW-60KV-WP - Manual (Page 23)

HV-WP/HW-WP Series Page 21 8. Counting Mode
8. 8. 8. 8. Counting Mode Counting Mode Counting Mode Counting Mode
The counting mode is the function to convert the total mass value (total weight) of
articles to a count, when each of these articles assume the same mass value.
It is necessary to store a unit mass to count articles.
8.1. 8.1. 8.1. 8.1. Storing a Unit Mass Storing a Unit Mass Storing a Unit Mass Storing a Unit Mass
Step 1 Press the MODE switch to display the unit .
Step 2 Press the SET switch to enter the mode to store a
unit mass.
Step 3 Press the ∧ switch to select the number of
samples. The greater the quantity of samples, the
greater the accuracy of the count.
5 pieces, 10 pieces, 20 pieces, 50 pieces, 100 pieces
Step 4 Put a container item on the weighing pan.
Press the TARE switch.
Step 5 Put in samples of number selected at step 3.
Press the ENTER switch to store it after the satbility
mark is displayed. Then the count is displayed.
Caution
When the sample is too light and it is not possible
to calculate a unit mass, the scale displays
lo lo lo lo ut ut ut ut
and returns to step 3. It is necessary to have more
than 5 digits in the unit of kg to weigh a sample.
Pressing the
ENTER switch after lo lo lo lo ut ut ut ut .... is
displayed, the next unit is displayed.
When the unit mass is too light to store, the scale
displays
lo lo lo lo ut . ut . ut . ut . . . . .
Step 4 Remove all things from the weighing pan.