ACDelco AC-G0003 - Manual (Page 22)

Figure 12 - Draining Oil Figure 13 - Adding Oil
Air Filter Maintenance
Routine maintenance of the air filter helps maintain proper airflow to the carburetor.
Occasionally verify that the air filter is free of excessive dirt. The air filter will require more frequent cleaning when operating this generator in
extremely dusty areas.
1. Unhinge the clasps at the top and bottom of the air filter cover as shown in Figure 14.
2. Remove the sponge-like elements from the casing.
3. Wipe the dirt from inside the empty air filter casing.
4. Wash the sponge-like elements in household detergent and warm water. Do not use gasoline or a flammable solvent.
5. Allow the sponge-like elements to dry thoroughly.
6. Soak the dry sponge-like elements in engine oil. Squeeze out any excess oil. The engine will smoke during initial startup if too much oil is left in
the air filter.
7. Replace the sponge-like elements in the air filter casing (the fine element first) and replace the cover.
Figure 14 - Removing the Air Filter Casing.
Fuel Filter Cup Cleaning
The fuel filter cup is a small well underneath the fuel valve which helps trap dirt and water that may be in the fuel tank before entering the engine.
To clean the fuel filter cup:
1. Turn the fuel valve to the “off” position.
2. Unscrew the fuel filter cup from the fuel valve using a wrench. (Turn the valve toward you to unscrew as illustrated in Figure 15.)
Model AC-G0003 5500 Surge Watts / 5000 Running Watts Portable Generator 22