Using the remote control – Arcam digital radio tuner DT81 User Manual

Page 8

Advertising
background image

DT81

8

Using the remote control

FM

DAB

PROG

DISP

RPT

MODE

BAND

1-9

2-10

3-11

FM

DAB

SEL

TUNER

CR-389

CD

AMPLIFIER

VCR

DVD

TAPE

AV

TUNER

CD

AUX

PHONO

ENTER

SP1

SP2

DISP

MENU

DISP

4-12

5-13

6-14

7-15

8-16

CR-389 Remote Control

FM/DAB

Ensure that DAB mode is selected using the

FM/DAB

toggle button. The DAB LED above the

FM/DAB

button is lit briefl y when DAB is selected.

Preset memory buttons

These buttons allow access to individual preset

stations. To select a preset press the corresponding

button. For presets 9 to 16, press and hold the

corresponding preset button for two seconds.

NOTE: Remember to install the two AAA batteries supplied
before trying to use your remote control.

Do not place anything in front of the tuner (where the IR
receiver is located), or the remote control may not work.

TUNE buttons

These buttons enable you to scroll through the
available services. Depending on how the tuner is set
up the service is either selected automatically after
2.5 seconds or when you press the

BAND

button.

For more information on this feature see ‘Selection
mode’ on page 7.

BAND

This button has the same function as

SELECT

on the

front panel.

MODE

This button has the same function as

DISPLAY MODE

on the front panel.

Amplifi er controls

These buttons offer basic control over Arcam

amplifi ers, such as the A65, A75 or A85.

CD player controls
These buttons offer basic control over Arcam CD
players, such as the CD72 or CD92.

DISP

This button toggles the tuner’s display between bright,
dim and off.

MENU

This button has the same function as the

MENU

button on the front panel of the tuner.

Advertising