Karcher SensorTimer TM ST6 DUO eco!ogic - Manual (Page 19)

– 3
During the initial startup, it can individually
be selected for each water outlet how it is to
be operated:

Sensor-controlled
The sensor is taught during the 60-sec-
ond countdown, i.e. the radio signal is
detected automatically.
 Time-controlled
The teaching process of the sensor is
cancelled with the esc/menu button
during the 60-second countdown.
In this case, the moisture tripping limit
at the control unit can not be set.
 Locked / inactive
The 60-second countdown passes
completely without the recognition of
the sensor or the esc/menu button be-
ing pushed, then the water outlet is in-
active. After deactivation of water outlet
1, the countdown for outlet 2 can be en-
abled with the OK button.
Initial startup control unit
Note: The predefined order during the initial startup must be strictly observed. Otherwise
it is not guaranteed that the sensor is correctly registered with the
control unit.
Note: The battery is not included in the scope of delivery.
 Insert the battery into the battery compartment in
the correct position (observe +/- marking).
 As soon as the battery is inserted, the display, after
a short self-test, changes directly into the settings
mode for the current time. The hours of the time
display are flashing.
19 EN