Karcher SensorTimer TM ST6 DUO eco!ogic - Manual (Page 30)

– 14
Performing a reset
 Remove the sensor cap of the sensor.
 Remove the battery clip from the battery.
 Remove the battery from the battery compartment
of the control unit.
 Insert the battery into the battery compartment in
the correct position (+/- marking).
 Hold down the OK button until the hour settings
are flashing in the display.
 Connect sensors with the control unit as described
in Chapter "Preparation / Teaching sensor".
1
.
2
.
Ok
1
.
2
.
30 EN