Avenview FO-HDSDI-L-SET - Manual (Page 5)

www.avenview.com 5
1.5 Features
- Enable transmission of digital video signal over optical fiber up to 1 km
- Automatic cable EQ up to 300m (1000ft) at SD-SDI or 150m (500ft) for HD-SDI
- Standard LC-type fiber optic connector
- Supports following protocols:
o SMPTE 259M (270Mbps)
o SMPTE 259M (360Mbps)
o SMPTE 292M / HDTV (1.485Gbps and 1.485/1.001Gbps)
o DVB ASI (270Mbps)
- Automatic re-clocked / Manual bypass (optional upon request)
- One SDI loop-out and one SDI BNC Ouput
- HD/SDI Input signal detection
- Easy installation
1.6 Package Contents
Before you start the installation of the converter, please check the package contents.
- FO-HDSDI-L-SET x 1
- Power Adapter (+5VDC) x2
- User’s Manual x1
1.7 Before Installation

Put the product in an even and stable location. If the product falls down or drops, it may cause an
injury or malfunction.

Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high
humidity.

Use the DC power adapter with correct specifications. If inappropriate power supply is used then it
may cause a fire.

Do not twist or pull by force ends of the optical cable. It can cause malfunction.