Avenview FO-HDSDI-L-SET - Manual (Page 8)

www.avenview.com 8
Section 3: Specifications
Item Description
Model FO-HDSDI-L-S FO-HDSDI-L-R
Model Transmitter (TX) Receiver (RX)
SDI Standards SD-SDI & HD-SDI
Auto HD/SD-SDI Detection Yes
Supported Protocols
SMPTE 259M (270Mbps / 360Mpbs), DVB ASI (270Mbps)
SMPTE 292M / HDTV (1.485Gbps and 1.485/1.001Gbps)
Video Bandwidth [1.485Gpbs & 1.485/1.001Gbps]
Data Rates 270 / 1483 / 1485 Mbps
Supported Video
[HD] 720p50/59.94/60, 1035i50/59.94/60, 1080i50/59.94/60, 1080p24/30
[SD] [email protected], PAL@50Hz
SDI signal type SMPTE-292M, SMPTE-259M, DVB-ASI
Output impedance
75

Auto Reclocking Mode
Automatic detection: 270Mbps / 1.483Gbps / 1.485Gbps
Automatic bypass: 177Mbps / 360Mbps / 540Mbps
Cable equalization
[HD-SDI] up to 150m (500ft)
[SD-SDI] up to 300m (1000ft)
[HD-SDI] up to 125m (410ft)
[SD-SDI] up to 300m (1000ft)
Loop Out 1 re-clocking SDI Loop Out
Audio support Yes
RP-918 pathological
patterns
Immune
Input Connectors 1x BNC (SDI) 1 x Optical LC (SDI)
Output Connectors
1x Optical LC (SDI)
1 x BNC (SDI – Loop Out)
2 x BNC (SDI)
BNC connector 75

inter-locked socket
Optical Fiber Connector LC Type
Fiber Optics
Wavelength: 850 nm
Extinction ratio: 8-10
Overshoot < 10%
Optical power: -4 to -10 dBm
Type: Multi-mode
Jitter < 0.2 UI
Rise/fall < 500 pS
Receiver sensitivity: -17 dBm
Dimensions 4.3” x 1.6” x 1.2” (L x W x H)
Weight 155g
Power Supply 5V 4A DC
Power Consumption 5 Watts (max)
Operating Temperature 0~40°C [32~104°F]
Storage Temperature -20~60°C [-4~140°F]
Relative Humidity 20~90% RH [no condensation]