ALESIS Studio Interface MasterControl - Manual (Page 44)

42
4.
Now, you have a blank project. Add an audio track for recording by choosing Project f Add
Track f Audio.
5. Be sure that the “inspector” – a strip on the left-hand side of
Cubase that shows all sorts of information about the selected
track – is active. If your view is similar to that shown below, the
Inspector is active. If you do not see all of the information on
the left-hand side, the Inspector is not active. To activate it,
press the “Show Inspector” button towards the upper left of the screen (just below the Edit menu in
the following picture).
Later, you can hide the
Inspector if you want to save
space on your screen.