Accu-Chek Sensor - Manual (Page 35)

5. Gently squeeze the bottle to form one small drop.
6. Bring the drop to the edge of the strip within the curve,
and allow the strip to automatically draw the solution
into the yellow window until it is completely filled.
An hourglass flashes in the
display until the measurement
is complete.
7. Tightly replace the cap on
control solution.
8. The control result appears. If result is within the
acceptable range (which is found on the side of the
vial of strips), an icon of the control vial appears on
the screen while the control test result and time and
date (if set) alternate with “OK” and “L1” or “L2” on
the display.
Example of an acceptable Level 1 control result.
or
25
I I I
II
II
III
II
II
II
I I
I
and
and