Addlogix EchoView - Wireless Video Adapter - Manual (Page 11)

EchoView - Wireless Video Adapter Manual Version 0.3
11
4.3 Configuring Administrative Password
Applying the administrative password prevents unauthorized users to access wireless video
adapter’s system settings.
1. Click Settings on the main wireless video application window.
2. Click Configuration password setup and then click Set a new password.
3. Type-in the password in the appropriate fields and click OK.
4. You will be prompted to type-in the password upon next time entering Settings.
4.4 Connecting to the Internet
You can access the Internet while using Addlogix wireless video adapter 7 .
1. Connect the Ethernet cable to the network port on the wireless video adapter.
2. If your network assigns an IP address automatically, then please go to step 6.
3. Click Settings on the main wireless video application window.
4. Click Network settings and click Use the following IP address.
5. Type-in the IP address, Netmask, Gateway and DNS addresses. Click OK to apply the
settings.
6. Cycle-power the Addlogix wireless video adapter.
7. Re-launch the Addlogix wireless video application.
4.5 Upgrading Firmware
Addlogix wireless video adapter’s firmware can be remotely upgraded via the Internet 8 . Your
wireless video adapter can always equip with the latest firmware.
1. Click Settings on the main wireless video application window.
2. Click Network settings and click Upgrade firmware.
3. The wireless video application will automatically detect for the last firmware available.
4. Follow the message prompts to complete firmware upgrade process.
5. Cycle-power the Addlogix wireless video adapter and update the software in your PC (see
section 3 Updating Software).
4.6 Enabling External Antenna
Addlogix wireless video adapter offers the option to attach an external antenna that maximizes
its wireless connectivity.
1. Connect the external antenna to the Addlogix wireless video adapter.
2. Click Settings on the main wireless video application window.
3. Click Use external antenna checkbox.
4. Click Select Projector and reconnect your Addlogix wireless video adapter.
7
Only the user who is currently projecting the PC screen wirelessly can access the Internet.
8
Please see Connecting to the Internet on how to make the wireless video adapter Internet accessible.