Addlogix EchoView - Wireless Video Adapter - Manual (Page 6)

EchoView - Wireless Video Adapter Manual Version 0.3
6
For Firefox users:
1. Launch Mozilla Firefox.
2. Click Tools from the menu bar and click
Options.
3. Click Connection Settings… in General
Options.
4. In Connection Settings dialog window (figure
3), select Direct connection to the Internet
and click OK.
Figure 3: Firefox Connection Settings
2.3 Connecting Wireless Video Adapter
You can connect Addlogix wireless video adapter to a display monitor that supports DVI or
VGA input. The display monitor will be ready to show video wirelessly.
1. Connect the wireless video adapter to a
display monitor’s DVI
3 or VGA input port.
2. Connect the included power adapter. The
included power adapter is optional if the
display monitor’s DVI port supplies
power
4 .
3. When the Addlogix splash screen (figure
3) is shown on the display monitor, the
wireless video adapter is properly powered,
connected and ready to use.
Figure 4: Addlogix Splash Screen
3
Adapter (not included) is required to connect a DVI-D or DVI-A display monitor.
4
Please refer to owner’s manual of the display monitor. Addlogix wireless video adapter is not guaranteed to work with every display monitor
that uses a DVI-I connector for video output.