Altinex MX2456RM - Manual (Page 13)

SWITCHERS
12
Example:
After executing the [8VR] command, the system
will return the version number 8R1.0. If the
user sends the [0VR] command, the system
will return the version number 8R1.0.
If multiple switchers are used, this command
sets a unique ID number for each of the
MX2456RM Switchers. Multiple switcher
modules can be controlled through a single RS-
232 port.
In order to control multiple modules
independently with one RS-232 port, the unit ID
must be used. Setting the unit ID allows the
user to send the same command to multiple
modules, but the module processes that
command with the indicated ID number only.
The factory default unit ID is1.
ACCESSORIES 8
Model No. Description
TABLE MOUNT HARDWARE
TM1276 Table Mount bracket for 2U ½ Rack-
Wide
RACK MOUNTING ACCESSORIES
DA1298RM Rack mount shelf for two units side by
side
DA1292RM Rack mount ears for single unit.
HIGH RESOLUTION 5 BNC to 5 BNC
COAXIAL CABLE
CB4200MR Bulk Cable 5 coaxes (500ft minimum)
CB4203MR 3 feet, 5 BNC to 5 BNC coaxial cable
CB4206MR 6 feet, 5 BNC to 5 BNC coaxial cable
CB4212MR 12 feet, 5 BNC to 5 BNC coaxial cable
CB4225MR 25 feet, 5 BNC to 5 BNC coaxial cable
CB4250MR 50 feet, 5 BNC to 5 BNC coaxial cable
CB4275MR 75 feet, 5 BNC to 5 BNC coaxial cable
CB42100MR 100 feet, 5 BNC to 5 BNC coaxial cable
CB42150MR 150 feet, 5 BNC to 5 BNC coaxial cable
SUPER HIGH RESOLUTION 5 BNC to
5 BNC COAX
CB4400MR Bulk Cable 5 coaxes (500ft minimum)
CB4406MR 6 feet, 5 BNC to 5 BNC coaxial cable
CB4412MR 12 feet, 5 BNC to 5 BNC coaxial cable
CB4425MR 25 feet, 5 BNC to 5 BNC coaxial cable
CB4450MR 50 feet, 5 BNC to 5 BNC coaxial cable
CB4475MR 75 feet, 5 BNC to 5 BNC coaxial cable
CB44100MR 100 feet, 5 BNC to 5 BNC coaxial cable
CB44150MR 150 feet, 5 BNC to 5 BNC coaxial cable
POWER CABLES
PC5301US Power cable for US
PC5302US Power cable for UK
PC5303US Power cable for Australia
PC5304US Power cable for Germany