Aussie 8462 User Manual
Page 11
11
FIG. D - Bottom Cylinder Bracket
FIG. C. - Top Cylinder Bracket
STEP 13 - ATTACH LP CYLINDER TO GRILL
•Remove the protective cap from the LP Cylinder
valve. Hold Regulator in a straight line with LP
Cylinder valve so the connection does not cross
thread. Insert Regulator Nipple into the LP
Cylinder valve as shown in FIG. E. Hand tighten
coupling nut in clockwise direction. Do not use
tools.
•Set bottom ring of LP Cylinder into Bottom Cylinder
Bracket and hang Cylinder collar on Top Cylinder
Bracket as shown below in FIGs. C and D.
SEE FIGS. C and D. Note differences in Top(20) and Bottom(22) Cylinder Brackets.
Install Cylinder
Brackets into slots in Left Side Panel as shown. Secure each with an M6X15
screw(23). Tighten Screws.
STEP 12 - INSTALL LP CYLINDER BRACKETS
FIG. E
Fill empty OPD LP Cylinder at your local LP gas supplier.
Item #20
Top Bracket
Item #22
Bottom
Bracket