Asus A7V400-MX - Manual (Page 46)

2-14 Chapter 2: BIOS information
Init Display First [PCI Slot]
This option allows you to select the primary VGA type if your system has multiple
video controllers. Configuration options: [PCI Slot] [AGP]
AGP Display switch [Auto]
This option allows you to set the AGP display control to [Auto] or through the
onboard AGP controller. Configuration options: [Auto] [Onchip AGP]
DDR voltage adjustment [Auto]
This option allows you to adjust the DDR voltage.
Configuration options: [2.6V] [2.5V] [Auto]
2.5.1 Chip Configuration
AGP & P2P Bridge Control
DRAM Clock/Drive Control
CPU & PCI Bus Control
VIA OnChip IDE Device
VGA Share Memory Size
[32M]
Chip Configuration
F1 : Help ↑↓ ↑↓ ↑↓ ↑↓ ↑↓ : Select Item -/+ : Change Value F5 : Setup Defaults
ESC : Exit →← →← →← →← →← : Select Menu Enter : Select Sub-menu F10 : Save and Exit
Select Menu
Item Specific Help
Press [Enter] to go
to sub menu.
VGA Share Memory Size [32M]
This option allows you to adjust the share memory size for the onboard VGA.
Configuration options: [16M] [32M] [64M]